Hayden Hanging Strap for 2-...
$6.99
Product details
Part 762017 is a hanging strap sized for 2-inch PVC central vacuum tubing, used to carry pipe overhead through joist bays, across rafters, and beneath basement ceilings as the run goes in. A horizontal run left unsupported over any real distance starts to droop between fittings, which loads the cemented joints with steady stress and can set the pipe rattling against the framing whenever the system runs, especially on a longer trunk line.
It is one of the least visible details in a central vacuum rough-in, and one of the ones that matters most for how the system holds up over years of use. A well-supported run stays straight, keeps its joints tight for the long haul, and stays quiet overhead instead of tapping a joist every time suction flexes the pipe during normal operation.
This is a standard-size strap built for PVC tubing at the common 2-inch central vacuum diameter rather than a part tied to one manufacturer's system, so it works equally well on a fresh rough-in, an extension into new rooms, or a retrofit fixing an older run that never got proper support to begin with.
- Part: 762017
- Fits: standard 2-inch PVC central vacuum tubing
- Use: supports horizontal pipe runs along joists and rafters
- Purpose: prevents sag, joint stress, and rattling against framing
Space several straps along each long run rather than relying on the fittings alone to carry the pipe's weight, since fittings are built to seal, not to bear a span's worth of load. Spacing them evenly, rather than clustering them near the ends of a run, keeps the whole section supported instead of leaving a long unsupported middle span to sag over time.